Caring and Installation

Caring Instruction

Brush gently before washing to prevent tangling.

Wash with lukewarm water and mild shampoo.

+ Condition and rinse thoroughly.

Air-dry on a hanger or mannequin head, or use a blow-dryer on low heat.

Style as desired. Avoid excessive heat.

Store in the bag provided when not in use.

Installation

1. Start with a high ponytail

  Gather your hair and secure it about 2-3 fingers back from your forehead.

2. Create a base

Twist your ponytail into a tight bun or braid.

3. Flip hair forward

Make sure your hair is flipped toward the front of your head before securing.

4. Secure with a hair tie.

Wrap the attached hair tie around the bun 2-3 times, depending on how thick your bun is.

5. Place the zip tie

Slide the 12-inch zip tie under the bun so it sits at the base.

6. Attach the zip tie.

Loop the zip tie through the small tabs.

7. Tighten

Pull the zip tie and secure it tightly to the back of the bun.

8. Place the ponytail.

Pull the ponytail piece over the bun and tighten the drawstring as much as possible (but don't over-tighten).

9. Secure the drawstring

Wrap the hanging drawstring around the bun and pin it in place with a bobby pin.

10. All done!

Your ponytail is now installed and ready to wear.

11. Secure the bow

Slide a zip tie through the fold of the bow (where the hair tie is attached) and wrap it around the bun once the ponytail is installed.